TECHNICAL SPECIFICATIONS Solar lamps manufactured by NOBAR Co. Iran

All parts of the lantern are entirely of high quality polycarbonate materials of their own. The size of the luminaire body is approximately 350 mm 355 x 180 mm, with a diameter of about 300 mm, with 280 ± 5 inches. In the case of the lantern, the full mask of mask is completely With a diameter of 330 ± 5 mm outside and 300 ± 5 mm at the point of attachment to the lighthouse at a depth of 215 ± 550, connected by a screw in the groove embedded on the body. In the case of half-masked half-lighthouse with a height of 5 ± 185 mm outside and 5 ± 230 at the point of attachment to the lantern with a depth of 215 ± 5, connected by a screw in the groove embedded on the body. The hinges are in the form of a hinge It comes with a solid body and has a plastic strip for sealing. The LED consists of the following parts: Casing (body) of the primary material of polycarbonate. Grade special for guilloches lights from the primary material of polycarbonate. Grade special for lenses. LEDs are traffic-aware, life-long 100,000 hours within the permissible range for guidance and traffic lights and Grade A signals directly from the manufacturer. LED LEDs and a fully reliable power supply are wrapped in a chassis and the lens is fitted with a sealing washer ( So that it is possible to enter water and dust and / or moisture No battery is available at all.) A 1 x 12V 9AH rechargeable battery is 12 months old and is powered by a battery in a teleshopping lamp and two batteries, and three houses are powered by two batteries. The 10W 21V solar cell 0.68A is a 16% lag of at least 10 years of age. For a twin lamp, the solar cell panel has a minimum of 20 watts, and three walled solar panels are used for at least 30 watts. The smart microcontroller has the following capabilities: battery voltage measurement, voltage Solar panel and charging and related calculations. Light intensity and consumption optimization with respect to charging current (new Environment) and battery voltage and solar panel. Reduce the effect of battery voltage changes on the output light. Preventing overcharging and discharging of the battery and eliminating heat. Using PWM modulation for output light variations. Execution of any changes based on the order of the buyer (software) Duration of operation Without charging, and with a battery pack of approximately 4 days a day. The charging time of the battery packed out in the maximum is 18 hours with the function of the lamp and 12 hours without the function of the light. Maximum output values ​​(day) to the minimum (night) 3 to 1 (can be changed In order of order) Four-way flashing simultaneously with e M (sync) The solar panel rotation is possible and adjusts in the best geographic direction to receive the highest light output of the modulus (minimum) of cd420. The IP module is 65 and the IP body is 55. The flame is resistant to heat and cold and Thermal tolerance is 30 to 80+ centimeters. All parts are easily open, closed and replaced if necessary. All movable parts that allow the penetration of water or dust into the lamp have resilient sealing gaskets. A syntax that, with the assurance of the mounting strength, is not possible to enter the water and dust into the lamp. It is resistant to minerals, rays of the sun (uv) and acid rain, and its components are not stained with sunlight. On all the main parts of the lantern, the calendar of production, the material of the raw materials, the name of the company Noubparat of Iran has been inscribed. A type of two or three houses can be used to turn the lights home simultaneously or in a combination. The quality and efficiency of the whole LED for one year is guaranteed and designed for a minimum of 5 years. Installation bases They are connected to the lighthouse body with a precision molding that allows the accurate adjustment (5 °) in the vertical axis to achieve the best with Ten completely solid to provide non-changeable and once installed does not apply any bending stress or reflex.