جداکننده-خطوط-18-سانتی

18 cm separator lines

TECHNICAL SPECIFICATIONS OF GROUNDWATER SEPARATES WITH 18 SEPTEMBER HEIGHT PRODUCED IN NOBARPAR INDUSTRIAL COMPANY

This type of separator is used for specialist BRT buses, separation of the relief and rescue lines and services on unidirectional streets, the separation of roundabouts on two-way streets, the organization of bus and taxi stations, cycling lines, parking lots, and more.
The weight of each detachable piece alone and without a safety helmet is 5050 grams, a length of about 100, a width of 23, and an altitude of 18 centimeters.
The separators are supplied in yellow and have long-lasting color resins due to the quality of the resin.
Each spacer can be fitted with an integral safety cylinder (presented in three different designs) to reflect the light and prevent nightmare drivers from being able to overwhelm.
The name and logo of the company, the calendar of production and the material of the primary material are carved on each separator.
Separators are made of specially designed polymeric materials and compact injectable molding that are well tolerated against stresses and heavy blows.
Separators are completely resistant to organic, mineral and sunlight (UV), and do not change color in the open air in the sun.
Separators are resistant to heat and cold, with a temperature range of 35-75 degrees Celsius.
Separators are fitted with 8 screws, washers and rollers (11 cm long roll plaque), easily replaceable, beautifully designed and fitted with urban furniture, and made of recyclable polymer materials.
The quality and performance of the separators are guaranteed for one year and designed and designed for a minimum of 5 years in natural conditions.

Line separators 9 cm

9 cm separator

Separate technical specifications lines Produced by Iran’s Nobarpart Industrial Company

Nobarpart Industrial Co., Ltd. Iran is one of the first designers and producers of plastic separators in Iran, which has been well proven after 10 years of its production and used in the warmest and coldest parts of Iran.

  1. The length of each separator is 100, width 26.5, height 9 cm
  2. The length of each large limiter, separator 43, width 26.5, height 9 cm
  3. The length of each small limiter is 33, 26.5 ft, 9 centimeters high
  4. A separator weighing 3425 grams, a large separator of 1300 grams, and a small separator of 1030 grams.

5. Separators are supplied in yellow (in addition to the traffic colors), and with regard to the resin consumed in comparison with the same types, it has a long-lasting color stability and high quality.

6. The name and logo of the company, the calendar of production and the sex of the consumer on the product, indicating the commitment of the company to the customers.

7. Separators and limiters and their index plate are made of special polymer material with special compression and injection molding, which provides good tolerance to stress and heavy loads.

8. Separators and limiters, and its index plate is resistant to organic, mineral and sunlight (UV) and does not change color from sunlight.

9. Separators and limiters and its indicator plate are resistant to heat and cold, with thermal resistance of 35 to + 85 ° C.

10. The design of the separator and the limiter and its index plate are such that they are folded together during installation.

11. To increase the strength and strength of the separator Below is one of 6 amplifiers.

12. The separator and its accessories are repairable polymer materials, without contamination of the environment. It is easy to install and replace with screws, washers and rollplates.

13. Quality and efficiency of the separator and its limitation for one year are guaranteed and designed for a minimum of 3 years.