Posts in category: speed bump

Technical Specifications for Industrial Pneumatic Recyclers of Iran’s Nobipart Industrial Company
Shape and paths and areas
1. This type of accelerator is intended to reduce the speed and, in order to ensure the safety of the crossing of residential intersections in the roadside. In the design, all provisions of the Road Signs Regulations of Iran and the International Convention on Road Traffic have been respected.
2- In the type 2.5 * 50 * 35, the width of the cover is 50, the length is 35, the height is 54.2 cm, the type is 2.5 * 50 * 50, the length of the cover is 50, and the height is 54.2 centimeters.
3. The weight of each speedometer is 2.5 * 2.5 * 50 * 35 cm, with an instep (bottom plate) of 1920 grams, with a height of 2.5 * 5 * 50 * 5 cm, with an insert (bottom plate) of 2640 grams.
4- Pushers are available in white colors and are excellent in long-lasting color quality with regard to consumable resins. (In natural condition at least 5 years)
5- The difference between the length and width of each of the sliding arches and the design of the slopes and joints in such a way that it avoids the slippage of the cars.
6. In the type of acceleration, 2.5 * 2.5 * 50 * 0, 5 cm, there are two reflections (cat eyes) on each side of the speed sensor to reflect the light and comfort of the possible obscurity of motorists at night.
7. Spindles are made of bamboo polymer material specially formulated for injection molding, which provides adequate tolerance to various types of stress and heavy duty.
8. Propellers are resistant to organic matter, mineral and sunlight (UV), and do not change color from sunlight.
9 – The speed reducers are resistant to frost and heat. Thermal tolerance is 35- + 85 ° C.
10. The design of the sliders is such that, when mounted on each other, the crankshafts prevent the assembly from being mounted due to the movement of its faces.
11. With each slipper, there is an inset number that prevents the slippage of the slider and creates a level difference in the slider mounting lines.
12-Pushers and packs of recycled polymeric materials without contamination of the environment using a screw and a screwdriver can easily be installed and replaced.
13. On each speedometer and the name of the company, the calendars of the product and the material of the primary material are carved, which indicates the commitment of the company to the customers.
14. The quality and performance of the speedometer is guaranteed for one year and designed and designed for a minimum life span of 5 years.

Technical specifications of production speeds of Iran Nubarpard Industrial Company

Nobarpart Industrial Co., Iran, is the first designer and manufacturer of plastic accelerators in the world. It is proud that after 17 years of producing the first plastic accelerator and after years of its use in the warmest and coldest parts of Iran, its efficiency and excellent quality have been proven to be well proven.

1. The length of each speed is 33×90 and limited It is 90, 33, 5 centimeters high.
2. The length of each speed 33 × 60, 60, Width 33, Height 3.5 cm.
3. The length of each speed limiter is 33×60 , 60, width 21, height 3/3 centimeters.
4. The weight of each speed bracket is 33×90 with a foam of 4350 grams and a limit of 2500 grams is
5. The weight of each velocity is 33×60, 1900 grams and its limit of 800 grams . The weight of each velocity is 33×60, 1900 grams and its limit of 800 grams

6- Speedlights in white colored vinyl and in the case of consumable resins, it is excellent in comparison with similar types with long-term color stability and high quality.
7. At each side, a speed of 33 × 90 is one cat eye for light reflection and an amnesia of nightmare for motorists at night.
8. The speed limiter and its limiter have suitable slopes and stanzards to prevent the heavy fluttering of your feet.
9 – On the back of the curtain, the insoles and its restricting are the name and logo of the company, the calendar of production and the material of the primary material consumed, which, in comparison with similar types, represents the commitment of the company to the customers.
10-speeds, insole and limiter made of special polymer material with special compression molding and compression molding, so that it has good tolerance to stress and heavy loads.
11. Speed ​​limiter and resistor are resistant to organic, mineral and sunlight (UV) and do not change the color of the sun.
12. Speed ​​limiter is resistant to cold and hot weather, with thermal tolerance of 35-800 degrees Celsius.
13. The method of designing speeds and limiting it in such a way that during the installation of each other, the collapse prevents the movement of the set of installed through the passage of the vehicles.
14. Speed ​​limiter and limiting it from recycled polymer materials without contamination of the environment. It is easy to install and replace with screws, screws and rollplates.
15. With each speed of 33 × 90 cm, two foam is considered, which prevents the speed of the asphalt and creates a level difference in the lines of mounting accelerators.
The 16-pound speed and roll plaque are produced by compact injection molding of polymeric materials with the required strength.
17. Limit of acceleration with double-sided and non-subordinate to the color of yellow and is placed at the two ends of the mounted assembly. Due to the angle of design of the edges, it prevents the lining and damage of tires from cars that run through the edges of the installation lines, The appearance of the lines is also beautiful.
18. The speed and quality of work are guaranteed for one year and designed and designed for a minimum life of 3 years in natural conditions.

Technical specifications of the street stretcher of 33.5 × 33.7 cm in the production of the Nobarpart Industrial Company in Iran

This type of accelerator prevents severe impact on cars and can be installed instead of asphalt barriers or with it, and if it can be fitted with a special intermediary, it can cover a wide longitudinal extension (like the width of the pedestrian crossing).

1. Approximate weight of each speed section with its floor is 6150 g, the length of each cut is 100, the width is 33 and its height is 7/7 cm, so that it covers at least 2 minutes after installation.
2. The speed limiters are supplied in white and yellow colors and have long-term color stability due to the quality of the resin consumed.

4- On each side, the speed of 33 × 100 is two cats The reflection reflects the possibility of motorists at night is

5- Speedboards have good slopes and slopes to prevent heavy shocks and slippage of cars. .

6. On all parts of the speedometer, the name of the company, the calendar of production and the material of the primary material is carved.

7. Speed caps made of polymeric material and special camphor and injection molding Compressed so that it can withstand all kinds of stress and heavy loads.

8. Speed limiters are perfectly resistant to organic, mineral, and sunlight (UV), and have a change in color against sunlight in the environment. Not free.

9 – The accelerators are resistant to cold and heat, with a thermal tolerance of 35 to + 75 ° C.

10- With intermediate speeds A dimension 50 x 50 x 50 cm, which when installed, it is possible to increase the length of the installation line It provides the desired amount, and the entire set of components is in some way mutually compatible They are not split up by traffic.

11 – speeds using a screwdriver and a special roller shutter The 11 cm installation is easily interchangeable And is made from recycled polymer materials.

12. Quality and Exercise A speedometer is warranted for one year and designed for a minimum life span of three years in normal conditions Is furnished.