چراغ-30- سانتی- لامپی

Three lanterns of 30 centimeters

Technical characteristics of the lantern of three 30-cm houses produced by Iran’s Nobarpart Industrial Company

1- Housing, ABS and PC polycarbonate door and mask The special color scheme for traffic lights for working in open environments has been designed and manufactured. 2. The lantern consists of three separate houses connected by a special metal clamp and above And the bottom two lanterns for connecting to the traffic light mast with adjustable angles of view and passing through the cable that is attached to it with a special clamp. 3. Each house has a size of 355 × 350 mm 350 mm The diameter of the lens is about 300 mm, with 280 ± 5 °. 4. In the case of a full mask mask with a diameter of 330 ± 530 mm outside and a diameter of ± 300 mm at the point of attachment to the lantern With a depth of ± 215 which is connected to the body by a screw in the groove embedded on the body. 5. In the case of half-masked half-mask with a height of 5 ± 185 mm outside and 230 ± 5 ° at the point of attachment to the lantern at a depth of 215 ± 5 °, The hinges are attached to the body. 6. Each lantern’s house consists of the following parts: 1-6 – Body 2 – 6 – The door is hinged to the body and has a plastic strip to seal and place the lens and reflector. 6.6. The lenses are transparent and have the same material as the PC or PMMA (a special grade for light bulbs and one hundred percent color), with excellent resistance to work in a free and warm environment, and with the addition The color consistency is provided for 5 years in three colors: green, amber, and red, and sealed with a special plastic band with a lantern lid and secured with a special mount. 4-6. Reflector for light bulb out to the door It is made of a PC with a special high-tech brush and has an internal surface with aluminum coatings (metallization) and ends with a chopper that is secured to it. 7. The lights are modular and can be mounted on each other from one to four 8. All parts are easily open, closed and replaced if necessary. 9. All moving parts that can penetrate the water or Trapped in the luminaire with elastic sealing gaskets, so as to ensure that the mounting strength does not allow water and dust to enter the lamp. 10. All dimensions and specifications of the optics are in accordance with the established European standards. – High-grade chopping knife is used in standard wiring of standard welders and completely unclogged principles that can not be connected or risk of electric shock. 12-Lighthouse stand (PC) with grid Special lanterns have been built. 13. Lanterns against minerals and highly acidic vapors. It is not able to change color from UV (sun rays). The lanterns are resistant to heat and cold, they have a thermal tolerance of 35 ° to + 85 ° C. 15. Lanterns are made of recyclable polymer materials and contaminated The environment does not come .16 – The mounting pins and their location to the lantern body are precisely molded in such a way that it allows accurate adjustment (5 °) around the vertical axis for the best returns to be completely solid and non-removable, and so Do not apply any flexural or tensile stress to the lamp. 17. Brackets are arranged by a 1.5-inch soldering wire in green, yellow, and yellow colors. The greenhouse, yellow, red and blue houses are connected to the terminal to the bottom of the house (green). 18. The lanterns have the ability to install the back plate. 19. In the case of three color lanterns, the lens color of the houses is respectively The bottom is up green, amber and red. 20. In the case of a yellow lantern, the lens is all three yellow amber houses. 21. In the case of red lanterns, the lens of all three houses is red. 22. In a variety of flashing lanterns of a kind Flashing with a suitable design for switching off at peak time and from high quality electronics and with a heat sink suitable for continuous operation in such a way as to be easy to install and replace. Can switch between 50 and 60 times in minutes, and has two symmetrical circuits for lanterns of two houses and three houses.23- On all parts of the calendar of production, raw material, name and logo of the company Novarbartar carved .24- For protective tests (dust and water) that are carried out in a validated laboratory in accordance with IEC529, at least IP 53 is accepted and the results of protective tests are available. 25. The quality and efficiency of the total light bulb is guaranteed for one year and for a minimum lifetime Designed and built for 5 years.

چراغ های لامپی عابر پیاده

Lamp pedestrian light

Technical Specifications for Pedestrian Lanterns manufactured by Nobarpart Industrial Company in Iran

Polycarbonate Poly Carbonate Black
1- All lanyard parts are made from high quality raw materials (yellow, green and red). Special grade lights.
2. The lantern consists of a separate masonry unit connected by a special metal clamp, and at the top and bottom of the two luminaire base for connecting to the traffic light mast with the adjustable angle of the curtain, connected to it with a special clamp.
3. The size of each house is approximately 275 × 180 × 275 mm, with a lens size of 210 × 210 mm, 195 mm × 195 mm in sight.
4. Anything on a lens with a three-way mask with a depth of 155 mm.
5 – The lantern is made up of the following parts: 1-5 – Body 2-5 – The door is hinged to the body and has a plastic bar to seal and place the lens and the front of the lens. 3-6. It is a two-layer device that is placed on each layer of a stacked dummy (a red lens) and a moving person (green lens), to refract and smooth out the light, and to keep the dummies from a transparent lens that has gleams at the inner surface and with a solid attachment bolt. With PC4’s special light tag – 5. Reflector for light-emitting light to the door connected to the inner surface of the interior No, with an aluminum coating (metallization), and ending at the inlet of the chip that is tightened to it.
6-Trunks are connected by a separate 1.5-inch soldered wire to green and green paints for the green and green houses for the Neol to the terminal located in the lower house (green). A special light guide is made.
7. Lighthouse base (PC)
8. All parts are easily opened and folded if necessary.
9. All movable parts that allow water or dust to penetrate into the lamp have elastic sealing gaskets so that it is not possible to enter water into the lamp and ensure that it can not enter the lamp.
10. All dimensions and optical characteristics are according to the established European standards.
11. The high quality porcelain lining is used for internal cleaning of a standard welded wire and is completely standardized with no connection or risk of electric shock.
12 – Mounting bases and their connection points to the luminaire body with precision molding, in such a way that it is possible to adjust precisely (5 degrees) in the axis of the axis to achieve the best returns fully and completely unmodifiable, and after installing no bending or torsional stress The lights do not apply.) Acid supplements are very resistant and can not change color from sunlight.
13. Lanterns against minerals have been resistant to sunlight (uv).
14. The lanterns are resistant to frost and heat, with a thermal tolerance of 35-85 degrees Celsius.
15. Lanterns are made of recyclable polymer materials and do not pollute the environment.
16. On all parts of the calendar of production, raw materials, the name of the company is Nubpratt. The IEC529 has been issued for protective tests (dust and water), which are based on standard standards
17. Minimum accepted IP is 53. The results of the protective tests are available.
18. The quality and function of the whole lamp is guaranteed for one year and designed and designed for a minimum life of 5 years.

تابلوهای-کنترل-خطوط

Lenses for guidance lights

Technical specification of the guidance lanterns produced by Noble Industrial Corporation of Iran

1. The lenses have a color stability of at least 5 years and have a primary resistance to ultraviolet radiation; they have a thermal tolerance of 40-80 ° C. The color of the standard color of the green is presented in a continuous manner.
2. The lenses are non-bubble and transparent, and are made of polished surfaces (surface roughness reduces light output in a short time)
3. The diameter of the lenses is 200 and 300 mm in size.
4. Lenses are designed in such a way that with elastic sealing gasket do not allow the entry of dust and dust into the light system of the lamp.
5. The lenses are convex and have spider-bar grooves inside, so that they distribute light uniformly at different distances and prevent light from falling to one side.

Combined traffic light

Characteristics of the LED light The combination of wind (solar-wind) manufactured by Iran’s Nebirbart Industrial Company-Energy needed to illuminate the light through a combination of sunlight and wind. – Use this light in areas where access to electricity is not possible or at points Due to the large amount of cloudy days, it is not possible to use a solar light alone. – Features and specifications of the optical and optical characteristics of this lamp are in accordance with the specifications of the company’s solar lanterns. Features and specifications of the wind turbine: (This turbine is within the power range of 20KW – 200 W available ) NPGW – 200W Model # 3 Number of blades 12 m Turbine diameter 211 km / h Minimum wind speed 3160 km / h Maximum wind speed 4500 / min Number of rounds per minute 5 Permanent magnet motor without coal generator 6200 w Output power at wind speed 45 km 7300 w Max output 814 v Output voltage 914.2 A Flow rate 106 m Height 1150 AH Power Battery 12 Diesel Battery Battery 1315 kg Battery weight 1423 kg Weight of solar light with solar panel and its accessories 1590 kg Weight of wind turbine with its accessories 16128 kg K L 175 Hours Maximum Operating Time Lights Without Solar & Wind Power (Battery Storage) 18 Years Warranty 19

Pedestrian-pedestrian-moving

Walker LED

The most technical LED walker

Noon Part Iran Industrial Co.

A set Full optical includes 2 green and red modulus that are Can be provided with lantern and in full or alone.

For Changing the Lampi lantern to the LED, if not The desire to replace the lantern body can only be replaced by the LED modules with the light system of LAMIP lantern.

Design The modules are interchangeable with the light system of Lampi lantern.

A Technical specifications of plastic parts:

-Parts Lantern is made of high-quality polycarbonate raw materials and special led grade Has been.

-Lantern Consists of two separate houses that are connected by a special metal clamp and on top and bottom 2-Number of lantern base (KPI) to connect to the rig with the ability to adjust the angle of view and pass The cable is made up of the medium with a special clamp.

– پایه های فانوس ( کرپی ) از جنس پلی کربنات مخصوص چراغ راهنمایی ساخته شده است و محل اتصال آن به بدنه فانوس با قالبگیری دقیق به نحوی است که امکان تنظیم دقیق ( 5 درجه ) در حول محور عمودی را برای کسب بهترین بازده به صورت کاملاً محکم و غیر قابل تغییر فراهم می‌آورد و پس از نصب هیچ‌گونه تنش خمشی یا پیچشی به چراغ اعمال نمی‌نماید .

– اندازه هرخانه تقریباً 180×275×275 میلیمتر با اندازه لنز حدود 210×210 میلیمتر که 195×195 میلیمتر آن در معرض دید می‌باشد.

– هر خانه بر روی لنز دارای نقاب سه وجه با عمق 155 میلیمتر است.

-Every home Lantern is composed of parts of the body and lid, which is shaped by the door to the body. And it has plastic strips for sealing to prevent water and dust from entering into Lantern.

-All The parts are easily opened and closed as necessary.

-All Moving parts that can penetrate water or dust into the lights have a washer Sealing elasticity is also It is not possible to ensure the installation strength and water and dust in the lights.

– لنزها از نوع بی رنگ و شفاف از جنس پلی‌کربنات گرید مخصوص چراغ‌های لامپی و مقاوم در برابر اشعه نورخورشید ساخته شده است.

-Technical specifications of optical and electronic

– برد LED درکیسینگ بصورت کاملاً قابل اطمینان پیچ شده و لنزها بگونه‌ای طراحی و نصب شده‌اند که امکان ورود هرگونه گرد و غبار و یا آب را بداخل آن غیر ممکن می‌سازند.

-LED With a lifetime of 000.100 hours of special lights, traffic certificates And traffic signals, which are directly in a grade type (A Grade) straight from The manufacturer is imported.

Green type Anne MCD 8000 and the red MCD 6000 within color spectrum permissible for lights Tips.

– ولتاژ ورودی 80-280 VAC در 47-62 HZ

-Dara Being control of micro-controller with three moving green types

-Protection Against input voltage shock

-Power Consumption in green Type 2 – 4 W and Red type 1.5 – 3 W

-Intensity of light Output on the horizontal axis 150 CD LED

– تعداد LED در نوع سبز 66 عدد و در نوع قرمز 84 عدد می‌باشد.

C) Other Specifications:

-Minimum IP limit for protective tests (dust and water) that Valid in lab based on IEC standard 529 accepted for 65 LED modulus and for Lantern is 54.

-Lantern is resistant to cold and heat, heat tolerance is 30 to 80 + º C Possess.

-Lantern Against minerals, sun rays (UV) and rain Acidity is very resistant to discoloration against the sun.

-Lantern It is made of recycled polymeric material and does not cause environmental pollution.

– To All of the main production calendar components, material of raw materials, name and logo of the company are engraved.

-Quality The entire lantern is guaranteed for one year and is designed and manufactured for a minimum of 5 years. Has been.

Lights-Ripeter

LED Training

مشخصـات Faner LED Cantact of the biggest and profile

One light set includes 3 The green, yellow, and red modules can be تنهایي in full lantern Be offered.

To change the Lanterns LAMIP to Pink LED That lantern is a suitable body, It does not have to be replaced by the body.

  1. The material of all plastic parts of the high quality raw materials (Poly carbonate) is grades color for the LED lights.
  2. Casing material (body) of Poly carbonate grades for the lights of the
  3. Poly carbonate grades lens material for lens
  4. The size of each home is approximately 160 * 145 * 135 mm with a lens diameter of about 100 mm.
  5. The LED range and the power supply are fully reliable in winding casing and the proper lens is suitable for the possibility of entering water and dust or humidity into the electronic complex.
  6. LEDS are traffic, and with a lifetime of 000.100 hours for the guidance of traffic osignal, which grade A (Grad A) is directly imported from the manufacturer.
  7. Its green variant is MCD 8000 and the yellow type MCD 5500 and the Red MCD 6000 and the scope of the permissible color spectrum for the LED lighting.
  8. The electronic components used in a range of grade one and the main.
  9. The input power range is from 180 to 260 volts, which is not the any a power fluctuations in the output applied to LEDS (1./. Output voltage)
  10. The power supply is equipped with an electrical shock protection system that works on a linear basis.
  11. The power supply is a automatic light-up system in the night of the day, due to the relatively high light of LEDS at night (especially for those who have a large scale), it is very useful in terms of safety and prevents dangerous incidents. This system increases the intensity of the published light by reducing the environment (linear and automatic), and with the increasing light in the light intensity, the lantern is released.
  12. Lantern and the modules are very resistant to minerals, sun rays (UV) and acidic rain and do not change the color of sunlight.
  13. Lantern and the modules are resistant to cold and heat, the heat tolerance of 35-to 80 + º C.
  14. Lantern and modules are polymeric in recyclable materials and do not cause environmental pollution.
  15. On all the main parts of the calendar of production, material of raw materials, name and logo of Novonpart Fillet company has been.
  16. In a variety of eye lights, a woman with a suitable design for the lack of switch at the time of the voltage and the high quality electronic parts and with debated Sik (Heat sink) suitable for continuous work which is easy to install and its replacement and switch at 50 to 60 times and has Two symmetric circuits have been used for lights and three-house lamps.
  17. The minimum IP for the protective tests (dust and water) in a valid laboratory based on the IEC529 standard is accepted for the 65 LED module and for Lantern 54.
  18. Quality and efficiency of the entire lantern and LED module are guaranteed for one year and are designed and manufactured for a minimum of 5 years.
چراغ-سولار

Solar lights

TECHNICAL SPECIFICATIONS Solar lamps manufactured by NOBAR Co. Iran

All parts of the lantern are entirely of high quality polycarbonate materials of their own. The size of the luminaire body is approximately 350 mm 355 x 180 mm, with a diameter of about 300 mm, with 280 ± 5 inches. In the case of the lantern, the full mask of mask is completely With a diameter of 330 ± 5 mm outside and 300 ± 5 mm at the point of attachment to the lighthouse at a depth of 215 ± 550, connected by a screw in the groove embedded on the body. In the case of half-masked half-lighthouse with a height of 5 ± 185 mm outside and 5 ± 230 at the point of attachment to the lantern with a depth of 215 ± 5, connected by a screw in the groove embedded on the body. The hinges are in the form of a hinge It comes with a solid body and has a plastic strip for sealing. The LED consists of the following parts: Casing (body) of the primary material of polycarbonate. Grade special for guilloches lights from the primary material of polycarbonate. Grade special for lenses. LEDs are traffic-aware, life-long 100,000 hours within the permissible range for guidance and traffic lights and Grade A signals directly from the manufacturer. LED LEDs and a fully reliable power supply are wrapped in a chassis and the lens is fitted with a sealing washer ( So that it is possible to enter water and dust and / or moisture No battery is available at all.) A 1 x 12V 9AH rechargeable battery is 12 months old and is powered by a battery in a teleshopping lamp and two batteries, and three houses are powered by two batteries. The 10W 21V solar cell 0.68A is a 16% lag of at least 10 years of age. For a twin lamp, the solar cell panel has a minimum of 20 watts, and three walled solar panels are used for at least 30 watts. The smart microcontroller has the following capabilities: battery voltage measurement, voltage Solar panel and charging and related calculations. Light intensity and consumption optimization with respect to charging current (new Environment) and battery voltage and solar panel. Reduce the effect of battery voltage changes on the output light. Preventing overcharging and discharging of the battery and eliminating heat. Using PWM modulation for output light variations. Execution of any changes based on the order of the buyer (software) Duration of operation Without charging, and with a battery pack of approximately 4 days a day. The charging time of the battery packed out in the maximum is 18 hours with the function of the lamp and 12 hours without the function of the light. Maximum output values ​​(day) to the minimum (night) 3 to 1 (can be changed In order of order) Four-way flashing simultaneously with e M (sync) The solar panel rotation is possible and adjusts in the best geographic direction to receive the highest light output of the modulus (minimum) of cd420. The IP module is 65 and the IP body is 55. The flame is resistant to heat and cold and Thermal tolerance is 30 to 80+ centimeters. All parts are easily open, closed and replaced if necessary. All movable parts that allow the penetration of water or dust into the lamp have resilient sealing gaskets. A syntax that, with the assurance of the mounting strength, is not possible to enter the water and dust into the lamp. It is resistant to minerals, rays of the sun (uv) and acid rain, and its components are not stained with sunlight. On all the main parts of the lantern, the calendar of production, the material of the raw materials, the name of the company Noubparat of Iran has been inscribed. A type of two or three houses can be used to turn the lights home simultaneously or in a combination. The quality and efficiency of the whole LED for one year is guaranteed and designed for a minimum of 5 years. Installation bases They are connected to the lighthouse body with a precision molding that allows the accurate adjustment (5 °) in the vertical axis to achieve the best with Ten completely solid to provide non-changeable and once installed does not apply any bending stress or reflex.

چراغ-30-سانتی-led

30 cm LED lantern

TECHNICAL SPECIFICATIONS 30 cm LED LAMP Production of Iran’s Nobarpart Industrial Company

General Specifications A complete optical set consists of 3 green, yellow and red modules that can be supplied with the lantern either fully or individually. To change the luminaires to the LEDs, if you do not want to replace the lantern, you can only replace the LED modules with the luminaires ‘luminaire luminaire system that was produced at Iran’s NoPPP. LED modules are designed to be interchangeable with the luminaires’ It is a production company of the company. All parts of the lantern are entirely of high quality polycarbonate materials, specially designed for guidance lights and highly resistant to uv and acid rain. The size of the luminaire body is approximately 355 × 350 mm, with a lens diameter of about 300 The millimeter has a range of 280 ± 5. In the case of a full-mask lantern, a full mask with a diameter of 330 ± 530 mm in diameter and 300 ± 5 mm in the lighthouse connection at a depth of 215 ± 5 is connected to the body with a screw on the luminaire. In the case of half-masked lighthouse with a height of 5 ± 185 mm outside and 230 ± 5 ° at the point of attachment to the lighthouse at a depth of 215 ± 5 °, which is attached to the body by a screw on the body. The hinge is secured to the body and has a plastic bar for sealing. – The LED modulus of the parts The following polymer has been formed: – Casing (body) of the primary polycarbonate material for specialty headlamps – lens of the primary polycarbonate Lens for LED and power supply should be trusted completely screwed in the casing and the lens is completely sealed installed on it. The lens also protects the light and the angle of light from possible water and dust and / or moisture entering the electronic set. LEDs are traffic-sensitive, life-saving, 000/100 hours special for traffic lights and traffic signals of the type One (Grad A) comes directly from the manufacturer. The green type is the mcd8000 and the yellow type is mcd5500 and the red is 6000 mcd and is limited to the color spectrum permitted for the traffic light. – All parts are easily open, closed and replaced if necessary. .- All moving parts that can penetrate the water or dust into the lamp have reactive gaskets. He does not have the possibility of entering water and dust into the lamp, while ensuring the strength of the installation. – All dimensions and specifications are in accordance with the European standard (AS2144). – Lighthouse bases of the PC .The mounting rings and their connection area to the lantern body with precision molding provide the possibility of accurate adjustment (5 degrees) in the vertical axis to provide the best performance in a completely sturdy and non-interchangeable manner, and after installation no stress Bending or torsion does not apply to the lamp. – The lanterns are capable of installing the back plate. – Lanterns and modules They are made of recyclable polymer materials and do not pollute the environment. – On all the main parts of the calendar of production, the raw material, the name of the company Novarbartar is carved. – The lights are modular and can be installed on each other from one to four buildings – The flashing light used in the lamp has a design suitable for switching off at peak voltage, and has high quality electronic components and a heat sink suitable for continuous operation. The flashing range can be changed easily. It is possible to switch between 50 and 60 times per minute and have a dual-symmetric dual-channel luminaires. Three houses. – The quality and performance of the entire lantern and LED is guaranteed for one year and has been designed and lashed for a minimum of 5 years. Technical Specifications: Operating Temperature: 70 to + 30 ° C. Input Voltage: 170-265 mm. Input Voltage: 40 mm. (Possible Thin Cables Available on the Market.) Power Consumption (10 ± 10 Watts) Independent of Lightning Intensity. Input Voltage Up to 95% (0.95 < PF) Distortion of current consumption less than 14% (14%> THD) Change of light source due to dimming from 30% to 100% Continuously protecting the input voltage shock and protecting over temperature when the delay time on and off is less than 100 milli Secondary filter eliminates high frequency noise and transient shocks (such as lightning) in the light input of the PWM method and, consequently, the static color spectrum Renewal of a torque of up to 300 V When one of the LEDs is burned, only 2 of them are turned off and the remaining LEDs remain constant. It works without flickering and shaking the light even in unstable power supply systems, using the latest switching power supply with high power factor and as a result The use of the very smallest parts and the destruction of the much less use of LEDs for long life and light intensity, and 30-degree angles, employing a special design of the printed circuit, which reduces the temperature and, as a result, increases the useful life. The minimum results are obtained for protective tests (rounded and Must and Water), which are in accordance with standard I The EC529 is implemented for the LED module IP 65 and for the IP 54 lantern.