Pedestrian lamp traffic light

by with No Comment Uncategorized
Pedestrian lamp traffic light

1- Gg

2- The traffic light consists of two separate parts that are connected by a special metal clamp, and at the top and bottom there are two bases for connecting to the traffic light mast with the ability to adjust the viewing angle and passing the cable between them.

3- The size of each house is approximately 180 × 275 × 275 mm, which is about 210 × 210 mm with a lens size and 195 × 195 mm is visible.

4- Each house on the lens has a three-sided mask with a depth of 155 mm.

5- Each traffic light house consists of the following parts:

5-1- Body

5-2- The door, which is hinged to the body and has a plastic strip for sealing, as well as the location of the lens and wristband.

5-3- The lens is in green and red and has two layers, in each layer there is a standing dummy (red lens) and a moving dummy (green lens). To smooth the output light, a transparent lens is used, which has protrusions on the inner surface and is fastened with a special fastener.

6- The screws are connected to separate 1.5 stranded wires. The green and red wires are for the Lines of the green and red houses, and the blue wire is their common neutral, which is connected to the terminal located in the lower house (green).

7- The bases are made of special grade for traffic lights.

8- All parts can be easily opened, closed and replaced if necessary.

9- All moving parts that allow water or dust to penetrate into the lamp have elastic sealing washers. So that while ensuring the strength of the installation, it is not possible for water, dust and dust to enter the lamp.

10- All optical dimensions and specifications are in accordance with valid European standards.

11- The connector is a very high quality Chinese type, and in the internal wiring, standard stranded and coiled wire have been used in a completely principled way that there is no possibility of connection or risk of electric shock.

12- The mounting bases and their connection to the body are such that it allows precise adjustment (5 degrees) around the vertical axis to achieve the best efficiency in a completely firm and unchangeable way. No flexural or torsional stress is applied to the lamp after installation.

13- The traffic light is very resistant to minerals, sun (uv) rays and acid rain. It does not change color in the sun.

14- This product is resistant to cold and heat and has a heat tolerance of -35 to +85 degrees Celsius.

15- This product is made of recyclable polymeric materials and does not cause environmental pollution.

16- On all the main parts, items such as production calendar, raw material, name and logo of Nobar Part Company are engraved.

17- gg

18- The quality and efficiency of the whole lamp is guaranteed for one year and has been designed and produced for a minimum life of 5 years.

Pedestrian LED traffic Light

by with No Comment Uncategorized
Pedestrain LED traffic light

A complete optical set consists of two modules, green and red, which can be provided alone or as a complete traffic light. To change the lamp traffic light to LED, if you do not want to replace the body, only the LED modules can be replaced with the light system of the lamp traffic lights. The modules are designed to be interchangeable with the optical system of lamp traffic lights.

A- Technical specifications of plastic parts – Parts are made of high quality polycarbonate grade raw materials for traffic lights. – This product consists of two separate houses that are connected by a special metal clamp. At the top and bottom there are two bases to connect to the mast (with the ability to adjust the angle of view) and pass the cable through which is secured with a special clamp. – The bases are made of polycarbonate for traffic lights. Their connection to the body with precision molding is such that it allows precise adjustment (5 degrees) around the vertical axis to achieve the best efficiency in a completely tight and unchangeable. No flexural or torsional stress is applied to the lamp after installation. – The size of each house is approximately 180 × 275 × 275 mm with a lens size of approximately 210 × 210 mm, which 195 × 195 mm is visible. – Each house on the lens has a three-sided mask with a depth of 155 mm. – Each house is made up of body parts and a door that the door is hinged to the body and sealed with a piece of plastic to prevent water and dust from entering the traffic light. – All parts can be easily opened, closed and replaced if necessary. – All moving parts that can allow water or dust to penetrate into the lamp have elastic sealing washers so that while ensuring the strength of the installation, it is not possible for water and dust to enter the body. – The lenses are colorless and transparent made of grade polycarbonate for lamp lights and resistant to sunlight.

B- Optical and electronic technical specifications – The LED board in the case is completely reliably screwed and the lenses are designed and installed in such a way that it is impossible to enter any dust or water into it. – LEDs are registered, traffic and have a lifespan of 100,000 hours. These LEDs are for traffic lights and traffic signals that are imported directly from the manufacturer in the first grade (A Grade) type. Its green type is 8000 mcd and its red type is 6000 mcd within the color range allowed for traffic lights. – 80-280 VAC input voltage at 47-62 HZ – Having microprocessor control with three movements in the moving green type. – Protection against input voltage shocks. Power is 2-4 watt in green and 1.5-3 watt in red – Output light intensity on the horizontal axis of the lamp is 150 cd. – The number of LEDs in the green type is 66 and in the red type is 84.

C- Other specifications – The minimum IP for protection tests (dust and water) performed in a valid laboratory according to IEC 529 is 65 for the LED module and 54 for the Body. – The traffic light is resistant to cold and heat and has a heat tolerance of -30 to +80 degrees Celsius. – The traffic light is very resistant to minerals, sun (uv) rays and acid rain. It does not change color in the sun. – The traffic light is made of recyclable polymeric materials and does not pollute the environment. – On all the main parts of the production calendar, the material of raw materials, the name and logo of the company are engraved. – The quality and efficiency of the product is guaranteed for one year and is designed and manufactured for a minimum life of 5 years.

Repeater LED traffic Light

by with No Comment Uncategorized
Repeater LED Traffic Light
Repeater LED Traffic Light

A complete optical set consists of 3 modules: green, yellow and red, which can be presented as a complete product or alone. To change the lamp lights to LED, if the product has a suitable body, there is no need to replace the body.

1- All plastic parts are made of high quality raw materials (Polycarbonate), self-color polycarbonate, and special grade for traffic lights.

2- Body material made of polycarbonate grade for traffic lights

3- The lens is made of polycarbonate grade for the lens

4- The size of each house is approximately 160 × 145 × 135 mm with a lens diameter of about 100 mm.

5- The LED board and the power supply are screwed into the case quite reliably and the lens is placed properly on it so that water, dust or moisture cannot enter the electronic part.

6- LEDs are registered, traffic and have a lifespan of 100,000 hours. These LEDs are for traffic lights and traffic signals that are imported directly from the manufacturer in the first grade (A Grade) type.

7- Its green type is 8000 mcd and its red type is 6000 mcd and its yellow type is 5500 mcd within the color range allowed for traffic lights.

8- The electronic components used in the board are first class and original.

9- The input voltage range is from 180 to 260 volts, in which the voltage fluctuations do not have the slightest effect on the output applied to the LEDs (less than 0.01 Output voltage)

10- The power supply has a linear shock protection system.

11- The power supply has an automatic system for adjusting the light at night, which is very useful in terms of safety due to the relatively high light of LEDs at night (especially for drivers who have night vision) and prevents dangerous accidents.

12- The traffic light is resistant to minerals, sun (uv) rays and acid rain. It does not change color in the sun.

13- The traffic light is resistant to cold and heat and has a heat tolerance of -35 to +80 degrees Celsius.

14- The traffic light is made of recyclable polymeric materials and does not pollute the environment.

15- On all the main parts of the production calendar, the material of raw materials, the name and logo of the company are engraved.

16- In all types of flashing lights, there is a type of flashing board with a suitable design for not switching during voltage peak. This board is made of high quality electronic components with a heatsink suitable for continuous work in a way that it is easy to install and replace and switches 50 to 60 times per minute. It also has two symmetrical circuits for the two and three houses traffic lights.

17- The minimum IP for protection tests (dust and water) performed in a valid laboratory according to IEC 529 is 65 for the LED module and 54 for the Body.

18- The quality and efficiency of the product is guaranteed for one year and is designed and manufactured for a minimum life of 5 years.

Nobarpart Industrial Co.

First News

by Uncategorized

The Ipsum is a dummy text with an unintelligible simplicity of the printing industry and using graphic designers. Printers and texts, as well as newspapers and magazines in the column as needed and for the current state of the technology needed and various applications aimed at improving the tools. Many books in sixty-three percent of the past, present, and future require a lot of recognition from the community and experts, so that software can create more knowledge for computer designers, especially creative designers and leading cultures in the Persian language. In this case, one can hope that all the difficulty in providing the hard typing methods and conditions will end. The required time, including the typesetting of the main achievements and responding to the ongoing questions from the existing world of design, should be used substantially.

Warehouse

Registering In Research And Development Of Industries And Mines Forum

by Uncategorized

The research and development unit was launched in the summer of 1397 and received the certificate of research and development from the Organization of Industry, Mine and Trade of Isfahan Province in January of the same year. This unit has been developed to improve the quality and improve the level of product performance, or to create new products in accordance with the knowledge of the day. It is hoped that this unit will be able to take effective steps to meet the traffic demands of the country, taking advantage of existing facilities and expert and efficient personnel and connecting with reputable scientific centers in Iran and other parts of the world.

Research

Establishment Of Research And Development Unit

by Uncategorized

The research and development unit was launched in the summer of 1397 And in the same month, he received a certificate of research and development from the organization of industry, mining and trade of Isfahan Province.

This unit has been developed to improve the quality and improve the level of product performance, or to create new products in accordance with the knowledge of the day. Hope this The unit utilizes the facilities available and expert and efficient personnel and communication with the centers Valid scientific in Iran and other parts of the world can take effective steps to meet the requirements can take effective steps to meet the traffic demands of the country.