مشخصـات Faner LED Cantact of the biggest and profile
One light set includes 3 The green, yellow, and red modules can be تنهایي in full lantern Be offered.
To change the Lanterns LAMIP to Pink LED That lantern is a suitable body, It does not have to be replaced by the body.
- The material of all plastic parts of the high quality raw materials (Poly carbonate) is grades color for the LED lights.
- Casing material (body) of Poly carbonate grades for the lights of the
- Poly carbonate grades lens material for lens
- The size of each home is approximately 160 * 145 * 135 mm with a lens diameter of about 100 mm.
- The LED range and the power supply are fully reliable in winding casing and the proper lens is suitable for the possibility of entering water and dust or humidity into the electronic complex.
- LEDS are traffic, and with a lifetime of 000.100 hours for the guidance of traffic osignal, which grade A (Grad A) is directly imported from the manufacturer.
- Its green variant is MCD 8000 and the yellow type MCD 5500 and the Red MCD 6000 and the scope of the permissible color spectrum for the LED lighting.
- The electronic components used in a range of grade one and the main.
- The input power range is from 180 to 260 volts, which is not the any a power fluctuations in the output applied to LEDS (1./. Output voltage)
- The power supply is equipped with an electrical shock protection system that works on a linear basis.
- The power supply is a automatic light-up system in the night of the day, due to the relatively high light of LEDS at night (especially for those who have a large scale), it is very useful in terms of safety and prevents dangerous incidents. This system increases the intensity of the published light by reducing the environment (linear and automatic), and with the increasing light in the light intensity, the lantern is released.
- Lantern and the modules are very resistant to minerals, sun rays (UV) and acidic rain and do not change the color of sunlight.
- Lantern and the modules are resistant to cold and heat, the heat tolerance of 35-to 80 + º C.
- Lantern and modules are polymeric in recyclable materials and do not cause environmental pollution.
- On all the main parts of the calendar of production, material of raw materials, name and logo of Novonpart Fillet company has been.
- In a variety of eye lights, a woman with a suitable design for the lack of switch at the time of the voltage and the high quality electronic parts and with debated Sik (Heat sink) suitable for continuous work which is easy to install and its replacement and switch at 50 to 60 times and has Two symmetric circuits have been used for lights and three-house lamps.
- The minimum IP for the protective tests (dust and water) in a valid laboratory based on the IEC529 standard is accepted for the 65 LED module and for Lantern 54.
- Quality and efficiency of the entire lantern and LED module are guaranteed for one year and are designed and manufactured for a minimum of 5 years.